NKF(3)

NAME

SYNOPSIS

DESCRIPTION
Nkf is a yet another kanji code converter among networks, hosts and terminals. It converts input kanji code to designated kanji code such as ISO-2022-JP, Shift_JIS, EUC-JP, UTF-8, UTF-16 or UTF-32.

One of the most unique faculty of nkf is the guess of the input kanji encodings. It currently recognizes ISO-2022-JP, Shift_JIS, EUC-JP, UTF-8, UTF-16 and UTF-32. So users needn't set the input kanji code explicitly.

By default, X0201 kana is converted into X0208 kana. For X0201 kana, SO/SI, SSO and ESC-(-I methods are supported. For automatic code detection, nkf assumes no X0201 kana in Shift_JIS. To accept X0201 in Shift_JIS, use -X, -x or -S.

multiple options are specifed as seprate strings, such as

  print nkf('--ic=UTF8-MAC', '-w', $string), "\n";

except the last arguments.

OPTIONS

-J -S -E -W -W16 -W32 -j -s -e -w -w16 -w32
    Specify input and output encodings. Upper case is input. cf. --ic and --oc.

    -J  ISO-2022-JP (JIS code).

    -S  Shift_JIS and JIS X 0201 kana. EUC-JP is recognized as X0201 kana. Without -x flag, JIS X 0201 Katakana (a.k.a.halfwidth kana) is converted into JIS X 0208. If you use Windows, see Windows-31J (CP932).

    -E  EUC-JP.

    -W  UTF-8N.

    -W16[BL][0]
        UTF-16. B or L gives whether Big Endian or Little Endian. 0 gives whther put BOM or not.

    -W32[BL][0]
        UTF-32. B or L gives whether Big Endian or Little Endian. 0 gives whther put BOM or not.

-b -u
    Output is buffered (DEFAULT), Output is unbuffered.

-t  No conversion.

-i[@B]
    Specify the escape sequence for JIS X 0208.

    -i@ Use ESC ( @. (JIS X 0208-1978)

    -iB Use ESC ( B. (JIS X 0208-1983/1990 DEFAULT)

-o[BJ]
    Specify the escape sequence for US-ASCII/JIS X 0201 Roman. (DEFAULT B)

-r  {de/en}crypt ROT13/47

-h[123] --hiragana --katakana --katakana-hiragana
    -h1 --hiragana
        Katakana to Hiragana conversion.

    -h2 --katakana
        Hiragana to Katakana conversion.

    -h3 --katakana-hiragana
        Katakana to Hiragana and Hiragana to Katakana conversion.

-T  Text mode output (MS-DOS)

-f[m [- n]]
    Folding on m length with n margin in a line. Without this option, fold length is 60 and fold margin is 10.

-F  New line preserving line folding.

-Z[0-3]
    Convert X0208 alphabet (Fullwidth Alphabets) to ASCII.

    -Z -Z0
        Convert X0208 alphabet to ASCII.

    -Z1 Convert X0208 kankaku to single ASCII space.

    -Z2 Convert X0208 kankaku to double ASCII spaces.

    -Z3 Replacing fullwidth >, <, ", & into '&gt;', '&lt;', '&quot;', '&amp;' as in HTML.

-X -x
    With -X or without this option, X0201 is converted into X0208 Kana. With -x, try to preserve X0208 kana and do not convert X0201 kana to X0208. In JIS output, ESC-(-I is used. In EUC output, SS2 is used.

-B[0-2]
    Assume broken JIS-Kanji input, which lost ESC. Useful when your site is using old B-News Nihongo patch.

    -B1 allows any chars after ESC-( or ESC-$.

    -B2 force ASCII after NL.

-I  Replacing non iso-2022-jp char into a geta character (substitute character in Japanese).

-m[BQN0]
    MIME ISO-2022-JP/ISO8859-1 decode. (DEFAULT) To see ISO8859-1 (Latin-1) -l is necessary.

    -mB Decode MIME base64 encoded stream. Remove header or other part before conversion.

    -mQ Decode MIME quoted stream. '_' in quoted stream is converted to space.

    -mN Non-strict decoding. It allows line break in the middle of the base64 encoding.

    -m0 No MIME decode.

-M  MIME encode. Header style. All ASCII code and control characters are intact.

    -MB MIME encode Base64 stream. Kanji conversion is performed before encoding, so this cannot be used as a picture encoder.

    -MQ Perform quoted encoding.

-l  Input and output code is ISO8859-1 (Latin-1) and ISO-2022-JP. -s, -e and -x are not compatible with this option.

-L[uwm] -d -c
    Convert line breaks.

    -Lu -d
        unix (LF)

    -Lw -c
        windows (CRLF)

    -Lm mac (CR)

        Without this option, nkf doesn't convert line breaks.

--fj --unix --mac --msdos --windows
    Convert for these systems.

--jis --euc --sjis --mime --base64
    Convert to named code.

--jis-input --euc-input --sjis-input --mime-input --base64-input
    Assume input system

--ic=input codeset --oc=output codeset
    Set the input or output codeset. NKF supports following codesets and those codeset names are case insensitive.

    ISO-2022-JP
        a.k.a. RFC1468, 7bit JIS, JUNET

    EUC-JP (eucJP-nkf)
        a.k.a. AT&T JIS, Japanese EUC, UJIS

    eucJP-ascii
    eucJP-ms
    CP51932
        Microsoft Version of EUC-JP.

    Shift_JIS
        a.k.a. SJIS, MS_Kanji

    Windows-31J
        a.k.a. CP932

    UTF-8
        same as UTF-8N

    UTF-8N
        UTF-8 without BOM

    UTF-8-BOM
        UTF-8 with BOM

    UTF8-MAC (input only)
        decomposed UTF-8

    UTF-16
        same as UTF-16BE

    UTF-16BE
        UTF-16 Big Endian without BOM

    UTF-16BE-BOM
        UTF-16 Big Endian with BOM

    UTF-16LE
        UTF-16 Little Endian without BOM

    UTF-16LE-BOM
        UTF-16 Little Endian with BOM

    UTF-32
        same as UTF-32BE

    UTF-32BE
        UTF-32 Big Endian without BOM

    UTF-32BE-BOM
        UTF-32 Big Endian with BOM

    UTF-32LE
        UTF-32 Little Endian without BOM

    UTF-32LE-BOM
        UTF-32 Little Endian with BOM

--fb-{skip, html, xml, perl, java, subchar}
    Specify the way that nkf handles unassigned characters. Without this option, --fb-skip is assumed.

--prefix=escape charactertarget character..
    When nkf converts to Shift_JIS, nkf adds a specified escape character to specified 2nd byte of Shift_JIS characters. 1st byte of argument is the escape character and following bytes are target characters.

--no-cp932ext
    Handle the characters extended in CP932 as unassigned characters.

--no-best-fit-chars
    When Unicode to Encoded byte conversion, don't convert characters which is not round trip safe. When Unicode to Unicode conversion, with this and -x option, nkf can be used as UTF converter. (In other words, without this and -x option, nkf doesn't save some characters)

    When nkf converts strings that related to path, you should use this opion.

--cap-input
    Decode hex encoded characters.

--url-input
    Unescape percent escaped characters.

--numchar-input
    Decode character reference, such as "&#....;".

--  Ignore rest of -option.

AUTHOR
Copyright (c) 1987, Fujitsu LTD. (Itaru ICHIKAWA).

Copyright (c) 1996-2018, The nkf Project.