
#
# General options
#

newlines                        { Auto, LF, CR, CRLF }
  The type of line endings. Default=Auto.

input_tab_size                  Unsigned Number
  The original size of tabs in the input. Default=8.

output_tab_size                 Unsigned Number
  The size of tabs in the output (only used if align_with_tabs=true). Default=8.

string_escape_char              Unsigned Number
  The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn).

string_escape_char2             Unsigned Number
  Alternate string escape char for Pawn. Only works right before the quote char.

string_replace_tab_chars        { False, True }
  Replace tab characters found in string literals with the escape sequence \t instead.

tok_split_gte                   { False, True }
  Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
  If True, 'assert(x<0 && y>=3)' will be broken. Default=False
  Improvements to template detection may make this option obsolete.

disable_processing_cmt          String
  Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file.

enable_processing_cmt           String
  Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file.

enable_digraphs                 { False, True }
  Enable parsing of digraphs. Default=False.

utf8_bom                        { Ignore, Add, Remove, Force }
  Control what to do with the UTF-8 BOM (recommend 'remove').

utf8_byte                       { False, True }
  If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8.

utf8_force                      { False, True }
  Force the output encoding to UTF-8.

#
# Spacing options
#

sp_arith                        { Ignore, Add, Remove, Force }
  Add or remove space around arithmetic operator '+', '-', '/', '*', etc
  also '>>>' '<<' '>>' '%' '|'.

sp_arith_additive               { Ignore, Add, Remove, Force }
  Add or remove space around arithmetic operator '+' and '-'. Overrides sp_arith

sp_assign                       { Ignore, Add, Remove, Force }
  Add or remove space around assignment operator '=', '+=', etc.

sp_cpp_lambda_assign            { Ignore, Add, Remove, Force }
  Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign.

sp_cpp_lambda_paren             { Ignore, Add, Remove, Force }
  Add or remove space after the capture specification in C++11 lambda.

sp_assign_default               { Ignore, Add, Remove, Force }
  Add or remove space around assignment operator '=' in a prototype.

sp_before_assign                { Ignore, Add, Remove, Force }
  Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.

sp_after_assign                 { Ignore, Add, Remove, Force }
  Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.

sp_enum_paren                   { Ignore, Add, Remove, Force }
  Add or remove space in 'NS_ENUM ('.

sp_enum_assign                  { Ignore, Add, Remove, Force }
  Add or remove space around assignment '=' in enum.

sp_enum_before_assign           { Ignore, Add, Remove, Force }
  Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.

sp_enum_after_assign            { Ignore, Add, Remove, Force }
  Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.

sp_enum_colon                   { Ignore, Add, Remove, Force }
  Add or remove space around assignment ':' in enum.

sp_pp_concat                    { Ignore, Add, Remove, Force }
  Add or remove space around preprocessor '##' concatenation operator. Default=Add.

sp_pp_stringify                 { Ignore, Add, Remove, Force }
  Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator.

sp_before_pp_stringify          { Ignore, Add, Remove, Force }
  Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.

sp_bool                         { Ignore, Add, Remove, Force }
  Add or remove space around boolean operators '&&' and '||'.

sp_compare                      { Ignore, Add, Remove, Force }
  Add or remove space around compare operator '<', '>', '==', etc.

sp_inside_paren                 { Ignore, Add, Remove, Force }
  Add or remove space inside '(' and ')'.

sp_paren_paren                  { Ignore, Add, Remove, Force }
  Add or remove space between nested parens: '((' vs ') )'.

sp_cparen_oparen                { Ignore, Add, Remove, Force }
  Add or remove space between back-to-back parens: ')(' vs ') ('.

sp_balance_nested_parens        { False, True }
  Whether to balance spaces inside nested parens.

sp_paren_brace                  { Ignore, Add, Remove, Force }
  Add or remove space between ')' and '{'.

sp_before_ptr_star              { Ignore, Add, Remove, Force }
  Add or remove space before pointer star '*'.

sp_before_unnamed_ptr_star      { Ignore, Add, Remove, Force }
  Add or remove space before pointer star '*' that isn't followed by a variable name
  If set to 'ignore', sp_before_ptr_star is used instead.

sp_between_ptr_star             { Ignore, Add, Remove, Force }
  Add or remove space between pointer stars '*'.

sp_after_ptr_star               { Ignore, Add, Remove, Force }
  Add or remove space after pointer star '*', if followed by a word.

sp_after_ptr_star_qualifier     { Ignore, Add, Remove, Force }
  Add or remove space after pointer star '*', if followed by a qualifier.

sp_after_ptr_star_func          { Ignore, Add, Remove, Force }
  Add or remove space after a pointer star '*', if followed by a func proto/def.

sp_ptr_star_paren               { Ignore, Add, Remove, Force }
  Add or remove space after a pointer star '*', if followed by an open paren (function types).

sp_before_ptr_star_func         { Ignore, Add, Remove, Force }
  Add or remove space before a pointer star '*', if followed by a func proto/def.

sp_before_byref                 { Ignore, Add, Remove, Force }
  Add or remove space before a reference sign '&'.

sp_before_unnamed_byref         { Ignore, Add, Remove, Force }
  Add or remove space before a reference sign '&' that isn't followed by a variable name.
  If set to 'ignore', sp_before_byref is used instead.

sp_after_byref                  { Ignore, Add, Remove, Force }
  Add or remove space after reference sign '&', if followed by a word.

sp_after_byref_func             { Ignore, Add, Remove, Force }
  Add or remove space after a reference sign '&', if followed by a func proto/def.

sp_before_byref_func            { Ignore, Add, Remove, Force }
  Add or remove space before a reference sign '&', if followed by a func proto/def.

sp_after_type                   { Ignore, Add, Remove, Force }
  Add or remove space between type and word. Default=Force.

sp_before_template_paren        { Ignore, Add, Remove, Force }
  Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.

sp_template_angle               { Ignore, Add, Remove, Force }
  Add or remove space in 'template <' vs 'template<'.
  If set to ignore, sp_before_angle is used.

sp_before_angle                 { Ignore, Add, Remove, Force }
  Add or remove space before '<>'.

sp_inside_angle                 { Ignore, Add, Remove, Force }
  Add or remove space inside '<' and '>'.

sp_angle_colon                  { Ignore, Add, Remove, Force }
  Add or remove space between '<>' and ':'.

sp_after_angle                  { Ignore, Add, Remove, Force }
  Add or remove space after '<>'.

sp_angle_paren                  { Ignore, Add, Remove, Force }
  Add or remove space between '<>' and '(' as found in 'new List<byte>(foo);'.

sp_angle_paren_empty            { Ignore, Add, Remove, Force }
  Add or remove space between '<>' and '()' as found in 'new List<byte>();'.

sp_angle_word                   { Ignore, Add, Remove, Force }
  Add or remove space between '<>' and a word as in 'List<byte> m;' or 'template <typename T> static ...'.

sp_angle_shift                  { Ignore, Add, Remove, Force }
  Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add.

sp_permit_cpp11_shift           { False, True }
  Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False.
  sp_angle_shift cannot remove the space without this option.

sp_before_sparen                { Ignore, Add, Remove, Force }
  Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc.

sp_inside_sparen                { Ignore, Add, Remove, Force }
  Add or remove space inside if-condition '(' and ')'.

sp_inside_sparen_close          { Ignore, Add, Remove, Force }
  Add or remove space before if-condition ')'. Overrides sp_inside_sparen.

sp_inside_sparen_open           { Ignore, Add, Remove, Force }
  Add or remove space after if-condition '('. Overrides sp_inside_sparen.

sp_after_sparen                 { Ignore, Add, Remove, Force }
  Add or remove space after ')' of 'if', 'for', 'switch', and 'while', etc.

sp_sparen_brace                 { Ignore, Add, Remove, Force }
  Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while', etc.

sp_invariant_paren              { Ignore, Add, Remove, Force }
  Add or remove space between 'invariant' and '(' in the D language.

sp_after_invariant_paren        { Ignore, Add, Remove, Force }
  Add or remove space after the ')' in 'invariant (C) c' in the D language.

sp_special_semi                 { Ignore, Add, Remove, Force }
  Add or remove space before empty statement ';' on 'if', 'for' and 'while'.

sp_before_semi                  { Ignore, Add, Remove, Force }
  Add or remove space before ';'. Default=Remove.

sp_before_semi_for              { Ignore, Add, Remove, Force }
  Add or remove space before ';' in non-empty 'for' statements.

sp_before_semi_for_empty        { Ignore, Add, Remove, Force }
  Add or remove space before a semicolon of an empty part of a for statement.

sp_after_semi                   { Ignore, Add, Remove, Force }
  Add or remove space after ';', except when followed by a comment. Default=Add.

sp_after_semi_for               { Ignore, Add, Remove, Force }
  Add or remove space after ';' in non-empty 'for' statements. Default=Force.

sp_after_semi_for_empty         { Ignore, Add, Remove, Force }
  Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).

sp_before_square                { Ignore, Add, Remove, Force }
  Add or remove space before '[' (except '[]').

sp_before_squares               { Ignore, Add, Remove, Force }
  Add or remove space before '[]'.

sp_inside_square                { Ignore, Add, Remove, Force }
  Add or remove space inside a non-empty '[' and ']'.

sp_after_comma                  { Ignore, Add, Remove, Force }
  Add or remove space after ',', 'a,b' vs 'a, b'.

sp_before_comma                 { Ignore, Add, Remove, Force }
  Add or remove space before ','. Default=Remove.

sp_after_mdatype_commas         { Ignore, Add, Remove, Force }
  Add or remove space between ',' and ']' in multidimensional array type 'int[,,]'. Only for C#.

sp_before_mdatype_commas        { Ignore, Add, Remove, Force }
  Add or remove space between '[' and ',' in multidimensional array type 'int[,,]'. Only for C#.

sp_between_mdatype_commas       { Ignore, Add, Remove, Force }
  Add or remove space between ',' in multidimensional array type 'int[,,]'. Only for C#.

sp_paren_comma                  { Ignore, Add, Remove, Force }
  Add or remove space between an open paren and comma: '(,' vs '( ,'. Default=Force.

sp_before_ellipsis              { Ignore, Add, Remove, Force }
  Add or remove space before the variadic '...' when preceded by a non-punctuator.

sp_after_class_colon            { Ignore, Add, Remove, Force }
  Add or remove space after class ':'.

sp_before_class_colon           { Ignore, Add, Remove, Force }
  Add or remove space before class ':'.

sp_after_constr_colon           { Ignore, Add, Remove, Force }
  Add or remove space after class constructor ':'.

sp_before_constr_colon          { Ignore, Add, Remove, Force }
  Add or remove space before class constructor ':'.

sp_before_case_colon            { Ignore, Add, Remove, Force }
  Add or remove space before case ':'. Default=Remove.

sp_after_operator               { Ignore, Add, Remove, Force }
  Add or remove space between 'operator' and operator sign.

sp_after_operator_sym           { Ignore, Add, Remove, Force }
  Add or remove space between the operator symbol and the open paren, as in 'operator ++('.

sp_after_operator_sym_empty     { Ignore, Add, Remove, Force }
  Overrides sp_after_operator_sym when the operator has no arguments, as in 'operator *()'.

sp_after_cast                   { Ignore, Add, Remove, Force }
  Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'.

sp_inside_paren_cast            { Ignore, Add, Remove, Force }
  Add or remove spaces inside cast parens.

sp_cpp_cast_paren               { Ignore, Add, Remove, Force }
  Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'.

sp_sizeof_paren                 { Ignore, Add, Remove, Force }
  Add or remove space between 'sizeof' and '('.

sp_after_tag                    { Ignore, Add, Remove, Force }
  Add or remove space after the tag keyword (Pawn).

sp_inside_braces_enum           { Ignore, Add, Remove, Force }
  Add or remove space inside enum '{' and '}'.

sp_inside_braces_struct         { Ignore, Add, Remove, Force }
  Add or remove space inside struct/union '{' and '}'.

sp_after_type_brace_init_lst_open { Ignore, Add, Remove, Force }
  Add or remove space after open brace in an unnamed temporary direct-list-initialization.

sp_before_type_brace_init_lst_close { Ignore, Add, Remove, Force }
  Add or remove space before close brace in an unnamed temporary direct-list-initialization.

sp_inside_type_brace_init_lst   { Ignore, Add, Remove, Force }
  Add or remove space inside an unnamed temporary direct-list-initialization.

sp_inside_braces                { Ignore, Add, Remove, Force }
  Add or remove space inside '{' and '}'.

sp_inside_braces_empty          { Ignore, Add, Remove, Force }
  Add or remove space inside '{}'.

sp_type_func                    { Ignore, Add, Remove, Force }
  Add or remove space between return type and function name
  A minimum of 1 is forced except for pointer return types.

sp_type_brace_init_lst          { Ignore, Add, Remove, Force }
  Add or remove space between type and open brace of an unnamed temporary direct-list-initialization.

sp_func_proto_paren             { Ignore, Add, Remove, Force }
  Add or remove space between function name and '(' on function declaration.

sp_func_proto_paren_empty       { Ignore, Add, Remove, Force }
  Add or remove space between function name and '()' on function declaration without parameters.

sp_func_def_paren               { Ignore, Add, Remove, Force }
  Add or remove space between function name and '(' on function definition.

sp_func_def_paren_empty         { Ignore, Add, Remove, Force }
  Add or remove space between function name and '()' on function definition without parameters.

sp_inside_fparens               { Ignore, Add, Remove, Force }
  Add or remove space inside empty function '()'.

sp_inside_fparen                { Ignore, Add, Remove, Force }
  Add or remove space inside function '(' and ')'.

sp_inside_tparen                { Ignore, Add, Remove, Force }
  Add or remove space inside the first parens in the function type: 'void (*x)(...)'.

sp_after_tparen_close           { Ignore, Add, Remove, Force }
  Add or remove between the parens in the function type: 'void (*x)(...)'.

sp_square_fparen                { Ignore, Add, Remove, Force }
  Add or remove space between ']' and '(' when part of a function call.

sp_fparen_brace                 { Ignore, Add, Remove, Force }
  Add or remove space between ')' and '{' of function.

sp_fparen_dbrace                { Ignore, Add, Remove, Force }
  Java: Add or remove space between ')' and '{{' of double brace initializer.

sp_func_call_paren              { Ignore, Add, Remove, Force }
  Add or remove space between function name and '(' on function calls.

sp_func_call_paren_empty        { Ignore, Add, Remove, Force }
  Add or remove space between function name and '()' on function calls without parameters.
  If set to 'ignore' (the default), sp_func_call_paren is used.

sp_func_call_user_paren         { Ignore, Add, Remove, Force }
  Add or remove space between the user function name and '(' on function calls
  You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.

sp_func_class_paren             { Ignore, Add, Remove, Force }
  Add or remove space between a constructor/destructor and the open paren.

sp_func_class_paren_empty       { Ignore, Add, Remove, Force }
  Add or remove space between a constructor without parameters or destructor and '()'.

sp_return_paren                 { Ignore, Add, Remove, Force }
  Add or remove space between 'return' and '('.

sp_attribute_paren              { Ignore, Add, Remove, Force }
  Add or remove space between '__attribute__' and '('.

sp_defined_paren                { Ignore, Add, Remove, Force }
  Add or remove space between 'defined' and '(' in '#if defined (FOO)'.

sp_throw_paren                  { Ignore, Add, Remove, Force }
  Add or remove space between 'throw' and '(' in 'throw (something)'.

sp_after_throw                  { Ignore, Add, Remove, Force }
  Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'.

sp_catch_paren                  { Ignore, Add, Remove, Force }
  Add or remove space between 'catch' and '(' in 'catch (something) { }'
  If set to ignore, sp_before_sparen is used.

sp_version_paren                { Ignore, Add, Remove, Force }
  Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
  If set to ignore, sp_before_sparen is used.

sp_scope_paren                  { Ignore, Add, Remove, Force }
  Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
  If set to ignore, sp_before_sparen is used.

sp_super_paren                  { Ignore, Add, Remove, Force }
  Add or remove space between 'super' and '(' in 'super (something)'. Default=Remove.

sp_this_paren                   { Ignore, Add, Remove, Force }
  Add or remove space between 'this' and '(' in 'this (something)'. Default=Remove.

sp_macro                        { Ignore, Add, Remove, Force }
  Add or remove space between macro and value.

sp_macro_func                   { Ignore, Add, Remove, Force }
  Add or remove space between macro function ')' and value.

sp_else_brace                   { Ignore, Add, Remove, Force }
  Add or remove space between 'else' and '{' if on the same line.

sp_brace_else                   { Ignore, Add, Remove, Force }
  Add or remove space between '}' and 'else' if on the same line.

sp_brace_typedef                { Ignore, Add, Remove, Force }
  Add or remove space between '}' and the name of a typedef on the same line.

sp_catch_brace                  { Ignore, Add, Remove, Force }
  Add or remove space between 'catch' and '{' if on the same line.

sp_brace_catch                  { Ignore, Add, Remove, Force }
  Add or remove space between '}' and 'catch' if on the same line.

sp_finally_brace                { Ignore, Add, Remove, Force }
  Add or remove space between 'finally' and '{' if on the same line.

sp_brace_finally                { Ignore, Add, Remove, Force }
  Add or remove space between '}' and 'finally' if on the same line.

sp_try_brace                    { Ignore, Add, Remove, Force }
  Add or remove space between 'try' and '{' if on the same line.

sp_getset_brace                 { Ignore, Add, Remove, Force }
  Add or remove space between get/set and '{' if on the same line.

sp_word_brace                   { Ignore, Add, Remove, Force }
  Add or remove space between a variable and '{' for C++ uniform initialization. Default=Add.

sp_word_brace_ns                { Ignore, Add, Remove, Force }
  Add or remove space between a variable and '{' for a namespace. Default=Add.

sp_before_dc                    { Ignore, Add, Remove, Force }
  Add or remove space before the '::' operator.

sp_after_dc                     { Ignore, Add, Remove, Force }
  Add or remove space after the '::' operator.

sp_d_array_colon                { Ignore, Add, Remove, Force }
  Add or remove around the D named array initializer ':' operator.

sp_not                          { Ignore, Add, Remove, Force }
  Add or remove space after the '!' (not) operator. Default=Remove.

sp_inv                          { Ignore, Add, Remove, Force }
  Add or remove space after the '~' (invert) operator. Default=Remove.

sp_addr                         { Ignore, Add, Remove, Force }
  Add or remove space after the '&' (address-of) operator. Default=Remove
  This does not affect the spacing after a '&' that is part of a type.

sp_member                       { Ignore, Add, Remove, Force }
  Add or remove space around the '.' or '->' operators. Default=Remove.

sp_deref                        { Ignore, Add, Remove, Force }
  Add or remove space after the '*' (dereference) operator. Default=Remove
  This does not affect the spacing after a '*' that is part of a type.

sp_sign                         { Ignore, Add, Remove, Force }
  Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove.

sp_incdec                       { Ignore, Add, Remove, Force }
  Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove.

sp_before_nl_cont               { Ignore, Add, Remove, Force }
  Add or remove space before a backslash-newline at the end of a line. Default=Add.

sp_after_oc_scope               { Ignore, Add, Remove, Force }
  Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'.

sp_after_oc_colon               { Ignore, Add, Remove, Force }
  Add or remove space after the colon in message specs
  '-(int) f:(int) x;' vs '-(int) f: (int) x;'.

sp_before_oc_colon              { Ignore, Add, Remove, Force }
  Add or remove space before the colon in message specs
  '-(int) f: (int) x;' vs '-(int) f : (int) x;'.

sp_after_oc_dict_colon          { Ignore, Add, Remove, Force }
  Add or remove space after the colon in immutable dictionary expression
  'NSDictionary *test = @{@"foo" :@"bar"};'.

sp_before_oc_dict_colon         { Ignore, Add, Remove, Force }
  Add or remove space before the colon in immutable dictionary expression
  'NSDictionary *test = @{@"foo" :@"bar"};'.

sp_after_send_oc_colon          { Ignore, Add, Remove, Force }
  Add or remove space after the colon in message specs
  '[object setValue:1];' vs '[object setValue: 1];'.

sp_before_send_oc_colon         { Ignore, Add, Remove, Force }
  Add or remove space before the colon in message specs
  '[object setValue:1];' vs '[object setValue :1];'.

sp_after_oc_type                { Ignore, Add, Remove, Force }
  Add or remove space after the (type) in message specs
  '-(int)f: (int) x;' vs '-(int)f: (int)x;'.

sp_after_oc_return_type         { Ignore, Add, Remove, Force }
  Add or remove space after the first (type) in message specs
  '-(int) f:(int)x;' vs '-(int)f:(int)x;'.

sp_after_oc_at_sel              { Ignore, Add, Remove, Force }
  Add or remove space between '@selector' and '('
  '@selector(msgName)' vs '@selector (msgName)'
  Also applies to @protocol() constructs.

sp_after_oc_at_sel_parens       { Ignore, Add, Remove, Force }
  Add or remove space between '@selector(x)' and the following word
  '@selector(foo) a:' vs '@selector(foo)a:'.

sp_inside_oc_at_sel_parens      { Ignore, Add, Remove, Force }
  Add or remove space inside '@selector' parens
  '@selector(foo)' vs '@selector( foo )'
  Also applies to @protocol() constructs.

sp_before_oc_block_caret        { Ignore, Add, Remove, Force }
  Add or remove space before a block pointer caret
  '^int (int arg){...}' vs. ' ^int (int arg){...}'.

sp_after_oc_block_caret         { Ignore, Add, Remove, Force }
  Add or remove space after a block pointer caret
  '^int (int arg){...}' vs. '^ int (int arg){...}'.

sp_after_oc_msg_receiver        { Ignore, Add, Remove, Force }
  Add or remove space between the receiver and selector in a message.
  '[receiver selector ...]'.

sp_after_oc_property            { Ignore, Add, Remove, Force }
  Add or remove space after @property.

sp_cond_colon                   { Ignore, Add, Remove, Force }
  Add or remove space around the ':' in 'b ? t : f'.

sp_cond_colon_before            { Ignore, Add, Remove, Force }
  Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon.

sp_cond_colon_after             { Ignore, Add, Remove, Force }
  Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon.

sp_cond_question                { Ignore, Add, Remove, Force }
  Add or remove space around the '?' in 'b ? t : f'.

sp_cond_question_before         { Ignore, Add, Remove, Force }
  Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question.

sp_cond_question_after          { Ignore, Add, Remove, Force }
  Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question.

sp_cond_ternary_short           { Ignore, Add, Remove, Force }
  In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options.

sp_case_label                   { Ignore, Add, Remove, Force }
  Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.

sp_range                        { Ignore, Add, Remove, Force }
  Control the space around the D '..' operator.

sp_after_for_colon              { Ignore, Add, Remove, Force }
  Control the spacing after ':' in 'for (TYPE VAR : EXPR)'. Only JAVA.

sp_before_for_colon             { Ignore, Add, Remove, Force }
  Control the spacing before ':' in 'for (TYPE VAR : EXPR)'. Only JAVA.

sp_extern_paren                 { Ignore, Add, Remove, Force }
  Control the spacing in 'extern (C)' (D).

sp_cmt_cpp_start                { Ignore, Add, Remove, Force }
  Control the space after the opening of a C++ comment '// A' vs '//A'.

sp_cmt_cpp_doxygen              { False, True }
  True: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'.

sp_cmt_cpp_qttr                 { False, True }
  True: If space is added with sp_cmt_cpp_start, do it after Qt translator or meta-data comments like '//:', '//=', and '//~'.

sp_endif_cmt                    { Ignore, Add, Remove, Force }
  Controls the spaces between #else or #endif and a trailing comment.

sp_after_new                    { Ignore, Add, Remove, Force }
  Controls the spaces after 'new', 'delete' and 'delete[]'.

sp_between_new_paren            { Ignore, Add, Remove, Force }
  Controls the spaces between new and '(' in 'new()'.

sp_after_newop_paren            { Ignore, Add, Remove, Force }
  Controls the spaces between ')' and 'type' in 'new(foo) BAR'.

sp_inside_newop_paren           { Ignore, Add, Remove, Force }
  Controls the spaces inside paren of the new operator: 'new(foo) BAR'.

sp_inside_newop_paren_open      { Ignore, Add, Remove, Force }
  Controls the space after open paren of the new operator: 'new(foo) BAR'.
  Overrides sp_inside_newop_paren.

sp_inside_newop_paren_close     { Ignore, Add, Remove, Force }
  Controls the space before close paren of the new operator: 'new(foo) BAR'.
  Overrides sp_inside_newop_paren.

sp_before_tr_emb_cmt            { Ignore, Add, Remove, Force }
  Controls the spaces before a trailing or embedded comment.

sp_num_before_tr_emb_cmt        Unsigned Number
  Number of spaces before a trailing or embedded comment.

sp_annotation_paren             { Ignore, Add, Remove, Force }
  Control space between a Java annotation and the open paren.

sp_skip_vbrace_tokens           { False, True }
  If True, vbrace tokens are dropped to the previous token and skipped.

force_tab_after_define          { False, True }
  If True, a <TAB> is inserted after #define.

#
# Indenting
#

indent_columns                  Unsigned Number
  The number of columns to indent per level.
  Usually 2, 3, 4, or 8. Default=8.

indent_continue                 Number
  The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
  For FreeBSD, this is set to 4. Negative value is absolute and not increased for each '(' level.

indent_param                    Unsigned Number
  The continuation indent for func_*_param if they are true.
  If non-zero, this overrides the indent.

indent_with_tabs                Unsigned Number
  How to use tabs when indenting code
  0=spaces only
  1=indent with tabs to brace level, align with spaces (default)
  2=indent and align with tabs, using spaces when not on a tabstop

indent_cmt_with_tabs            { False, True }
  Comments that are not a brace level are indented with tabs on a tabstop.
  Requires indent_with_tabs=2. If false, will use spaces.

indent_align_string             { False, True }
  Whether to indent strings broken by '\' so that they line up.

indent_xml_string               Unsigned Number
  The number of spaces to indent multi-line XML strings.
  Requires indent_align_string=True.

indent_brace                    Unsigned Number
  Spaces to indent '{' from level.

indent_braces                   { False, True }
  Whether braces are indented to the body level.

indent_braces_no_func           { False, True }
  Disabled indenting function braces if indent_braces is True.

indent_braces_no_class          { False, True }
  Disabled indenting class braces if indent_braces is True.

indent_braces_no_struct         { False, True }
  Disabled indenting struct braces if indent_braces is True.

indent_brace_parent             { False, True }
  Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.

indent_paren_open_brace         { False, True }
  Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace.

indent_cs_delegate_brace        { False, True }
  indent a C# delegate by another level, default is to not indent by another level.

indent_namespace                { False, True }
  Whether the 'namespace' body is indented.

indent_namespace_single_indent  { False, True }
  Only indent one namespace and no sub-namespaces.
  Requires indent_namespace=True.

indent_namespace_level          Unsigned Number
  The number of spaces to indent a namespace block.

indent_namespace_limit          Unsigned Number
  If the body of the namespace is longer than this number, it won't be indented.
  Requires indent_namespace=True. Default=0 (no limit)

indent_extern                   { False, True }
  Whether the 'extern "C"' body is indented.

indent_class                    { False, True }
  Whether the 'class' body is indented.

indent_class_colon              { False, True }
  Whether to indent the stuff after a leading base class colon.

indent_class_on_colon           { False, True }
  Indent based on a class colon instead of the stuff after the colon.
  Requires indent_class_colon=True. Default=False.

indent_constr_colon             { False, True }
  Whether to indent the stuff after a leading class initializer colon.

indent_ctor_init_leading        Unsigned Number
  Virtual indent from the ':' for member initializers. Default=2.

indent_ctor_init                Number
  Additional indent for constructor initializer list.
  Negative values decrease indent down to the first column. Default=0.

indent_else_if                  { False, True }
  False=treat 'else\nif' as 'else if' for indenting purposes
  True=indent the 'if' one level.

indent_var_def_blk              Number
  Amount to indent variable declarations after a open brace. neg=relative, pos=absolute.

indent_var_def_cont             { False, True }
  Indent continued variable declarations instead of aligning.

indent_shift                    { False, True }
  Indent continued shift expressions ('<<' and '>>') instead of aligning.
  Turn align_left_shift off when enabling this.

indent_func_def_force_col1      { False, True }
  True:  force indentation of function definition to start in column 1
  False: use the default behavior.

indent_func_call_param          { False, True }
  True:  indent continued function call parameters one indent level
  False: align parameters under the open paren.

indent_func_def_param           { False, True }
  Same as indent_func_call_param, but for function defs.

indent_func_proto_param         { False, True }
  Same as indent_func_call_param, but for function protos.

indent_func_class_param         { False, True }
  Same as indent_func_call_param, but for class declarations.

indent_func_ctor_var_param      { False, True }
  Same as indent_func_call_param, but for class variable constructors.

indent_template_param           { False, True }
  Same as indent_func_call_param, but for templates.

indent_func_param_double        { False, True }
  Double the indent for indent_func_xxx_param options.
  Use both values of the options indent_columns and indent_param.

indent_func_const               Unsigned Number
  Indentation column for standalone 'const' function decl/proto qualifier.

indent_func_throw               Unsigned Number
  Indentation column for standalone 'throw' function decl/proto qualifier.

indent_member                   Unsigned Number
  The number of spaces to indent a continued '->' or '.'
  Usually set to 0, 1, or indent_columns.

indent_sing_line_comments       Unsigned Number
  Spaces to indent single line ('//') comments on lines before code.

indent_relative_single_line_comments { False, True }
  If set, will indent trailing single line ('//') comments relative
  to the code instead of trying to keep the same absolute column.

indent_switch_case              Unsigned Number
  Spaces to indent 'case' from 'switch'
  Usually 0 or indent_columns.

indent_switch_pp                { False, True }
  Whether to indent preproccesor statements inside of switch statements.

indent_case_shift               Unsigned Number
  Spaces to shift the 'case' line, without affecting any other lines
  Usually 0.

indent_case_brace               Number
  Spaces to indent '{' from 'case'.
  By default, the brace will appear under the 'c' in case.
  Usually set to 0 or indent_columns.
  negative value are OK.

indent_col1_comment             { False, True }
  Whether to indent comments found in first column.

indent_label                    Number
  How to indent goto labels
    >0: absolute column where 1 is the leftmost column
   <=0: subtract from brace indent
  Default=1

indent_access_spec              Number
  Same as indent_label, but for access specifiers that are followed by a colon. Default=1

indent_access_spec_body         { False, True }
  Indent the code after an access specifier by one level.
  If set, this option forces 'indent_access_spec=0'.

indent_paren_nl                 { False, True }
  If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended).

indent_paren_close              Unsigned Number
  Controls the indent of a close paren after a newline.
  0: Indent to body level
  1: Align under the open paren
  2: Indent to the brace level

indent_paren_after_func_def     { False, True }
  Controls the indent of the open paren of a function definition, if on it's own line.If True, indents the open paren

indent_paren_after_func_decl    { False, True }
  Controls the indent of the open paren of a function declaration, if on it's own line.If True, indents the open paren

indent_paren_after_func_call    { False, True }
  Controls the indent of the open paren of a function call, if on it's own line.If True, indents the open paren

indent_comma_paren              { False, True }
  Controls the indent of a comma when inside a paren.If True, aligns under the open paren.

indent_bool_paren               { False, True }
  Controls the indent of a BOOL operator when inside a paren.If True, aligns under the open paren.

indent_first_bool_expr          { False, True }
  If 'indent_bool_paren' is True, controls the indent of the first expression. If True, aligns the first expression to the following ones.

indent_square_nl                { False, True }
  If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended).

indent_preserve_sql             { False, True }
  Don't change the relative indent of ESQL/C 'EXEC SQL' bodies.

indent_align_assign             { False, True }
  Align continued statements at the '='. Default=True
  If False or the '=' is followed by a newline, the next line is indent one tab.

indent_oc_block                 { False, True }
  Indent OC blocks at brace level instead of usual rules.

indent_oc_block_msg             Unsigned Number
  Indent OC blocks in a message relative to the parameter name.
  0=use indent_oc_block rules, 1+=spaces to indent

indent_oc_msg_colon             Unsigned Number
  Minimum indent for subsequent parameters

indent_oc_msg_prioritize_first_colon { False, True }
  If True, prioritize aligning with initial colon (and stripping spaces from lines, if necessary).
  Default=True.

indent_oc_block_msg_xcode_style { False, True }
  If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level).

indent_oc_block_msg_from_keyword { False, True }
  If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword.

indent_oc_block_msg_from_colon  { False, True }
  If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon.

indent_oc_block_msg_from_caret  { False, True }
  If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is.

indent_oc_block_msg_from_brace  { False, True }
  If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is.

indent_min_vbrace_open          Unsigned Number
  When identing after virtual brace open and newline add further spaces to reach this min. indent.

indent_vbrace_open_on_tabstop   { False, True }
  True: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop.

indent_token_after_brace        { False, True }
  If True, a brace followed by another token (not a newline) will indent all contained lines to match the token.Default=True.

indent_cpp_lambda_body          { False, True }
  If True, cpp lambda body will be indentedDefault=False.

indent_using_block              { False, True }
  indent (or not) an using block if no braces are used. Only for C#.Default=True.

indent_ternary_operator         Unsigned Number
  indent the continuation of ternary operator.
  0: (Default) off
  1: When the `if_false` is a continuation, indent it under `if_false`
  2: When the `:` is a continuation, indent it under `?`

indent_ignore_asm_block         { False, True }
  If true, ignore indent and align for asm blocks as they have their own indentation.

#
# Newline adding and removing options
#

nl_collapse_empty_body          { False, True }
  Whether to collapse empty blocks between '{' and '}'.

nl_assign_leave_one_liners      { False, True }
  Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'.

nl_class_leave_one_liners       { False, True }
  Don't split one-line braced statements inside a class xx { } body.

nl_enum_leave_one_liners        { False, True }
  Don't split one-line enums: 'enum foo { BAR = 15 };'

nl_getset_leave_one_liners      { False, True }
  Don't split one-line get or set functions.

nl_func_leave_one_liners        { False, True }
  Don't split one-line function definitions - 'int foo() { return 0; }'.

nl_cpp_lambda_leave_one_liners  { False, True }
  Don't split one-line C++11 lambdas - '[]() { return 0; }'.

nl_if_leave_one_liners          { False, True }
  Don't split one-line if/else statements - 'if(a) b++;'.

nl_while_leave_one_liners       { False, True }
  Don't split one-line while statements - 'while(a) b++;'.

nl_oc_msg_leave_one_liner       { False, True }
  Don't split one-line OC messages.

nl_oc_block_brace               { Ignore, Add, Remove, Force }
  Add or remove newline between Objective-C block signature and '{'.

nl_start_of_file                { Ignore, Add, Remove, Force }
  Add or remove newlines at the start of the file.

nl_start_of_file_min            Unsigned Number
  The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'.

nl_end_of_file                  { Ignore, Add, Remove, Force }
  Add or remove newline at the end of the file.

nl_end_of_file_min              Unsigned Number
  The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force').

nl_assign_brace                 { Ignore, Add, Remove, Force }
  Add or remove newline between '=' and '{'.

nl_assign_square                { Ignore, Add, Remove, Force }
  Add or remove newline between '=' and '[' (D only).

nl_after_square_assign          { Ignore, Add, Remove, Force }
  Add or remove newline after '= [' (D only). Will also affect the newline before the ']'.

nl_func_var_def_blk             Unsigned Number
  The number of blank lines after a block of variable definitions at the top of a function body
  0 = No change (default).

nl_typedef_blk_start            Unsigned Number
  The number of newlines before a block of typedefs
  0 = No change (default)
  is overridden by the option 'nl_after_access_spec'.

nl_typedef_blk_end              Unsigned Number
  The number of newlines after a block of typedefs
  0 = No change (default).

nl_typedef_blk_in               Unsigned Number
  The maximum consecutive newlines within a block of typedefs
  0 = No change (default).

nl_var_def_blk_start            Unsigned Number
  The number of newlines before a block of variable definitions not at the top of a function body
  0 = No change (default)
  is overridden by the option 'nl_after_access_spec'.

nl_var_def_blk_end              Unsigned Number
  The number of newlines after a block of variable definitions not at the top of a function body
  0 = No change (default).

nl_var_def_blk_in               Unsigned Number
  The maximum consecutive newlines within a block of variable definitions
  0 = No change (default).

nl_fcall_brace                  { Ignore, Add, Remove, Force }
  Add or remove newline between a function call's ')' and '{', as in:
  list_for_each(item, &list) { }.

nl_enum_brace                   { Ignore, Add, Remove, Force }
  Add or remove newline between 'enum' and '{'.

nl_enum_class                   { Ignore, Add, Remove, Force }
  Add or remove newline between 'enum' and 'class'.

nl_enum_class_identifier        { Ignore, Add, Remove, Force }
  Add or remove newline between 'enum class' and the identifier.

nl_enum_identifier_colon        { Ignore, Add, Remove, Force }
  Add or remove newline between 'enum class' type and ':'.

nl_enum_colon_type              { Ignore, Add, Remove, Force }
  Add or remove newline between 'enum class identifier :' and 'type' and/or 'type'.

nl_struct_brace                 { Ignore, Add, Remove, Force }
  Add or remove newline between 'struct and '{'.

nl_union_brace                  { Ignore, Add, Remove, Force }
  Add or remove newline between 'union' and '{'.

nl_if_brace                     { Ignore, Add, Remove, Force }
  Add or remove newline between 'if' and '{'.

nl_brace_else                   { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and 'else'.

nl_elseif_brace                 { Ignore, Add, Remove, Force }
  Add or remove newline between 'else if' and '{'
  If set to ignore, nl_if_brace is used instead.

nl_else_brace                   { Ignore, Add, Remove, Force }
  Add or remove newline between 'else' and '{'.

nl_else_if                      { Ignore, Add, Remove, Force }
  Add or remove newline between 'else' and 'if'.

nl_before_if_closing_paren      { Ignore, Add, Remove, Force }
  Add or remove newline before 'if'/'else if' closing parenthesis.

nl_brace_finally                { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and 'finally'.

nl_finally_brace                { Ignore, Add, Remove, Force }
  Add or remove newline between 'finally' and '{'.

nl_try_brace                    { Ignore, Add, Remove, Force }
  Add or remove newline between 'try' and '{'.

nl_getset_brace                 { Ignore, Add, Remove, Force }
  Add or remove newline between get/set and '{'.

nl_for_brace                    { Ignore, Add, Remove, Force }
  Add or remove newline between 'for' and '{'.

nl_catch_brace                  { Ignore, Add, Remove, Force }
  Add or remove newline between 'catch' and '{'.

nl_brace_catch                  { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and 'catch'.

nl_brace_square                 { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and ']'.

nl_brace_fparen                 { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and ')' in a function invocation.

nl_while_brace                  { Ignore, Add, Remove, Force }
  Add or remove newline between 'while' and '{'.

nl_scope_brace                  { Ignore, Add, Remove, Force }
  Add or remove newline between 'scope (x)' and '{' (D).

nl_unittest_brace               { Ignore, Add, Remove, Force }
  Add or remove newline between 'unittest' and '{' (D).

nl_version_brace                { Ignore, Add, Remove, Force }
  Add or remove newline between 'version (x)' and '{' (D).

nl_using_brace                  { Ignore, Add, Remove, Force }
  Add or remove newline between 'using' and '{'.

nl_brace_brace                  { Ignore, Add, Remove, Force }
  Add or remove newline between two open or close braces.
  Due to general newline/brace handling, REMOVE may not work.

nl_do_brace                     { Ignore, Add, Remove, Force }
  Add or remove newline between 'do' and '{'.

nl_brace_while                  { Ignore, Add, Remove, Force }
  Add or remove newline between '}' and 'while' of 'do' statement.

nl_switch_brace                 { Ignore, Add, Remove, Force }
  Add or remove newline between 'switch' and '{'.

nl_synchronized_brace           { Ignore, Add, Remove, Force }
  Add or remove newline between 'synchronized' and '{'.

nl_multi_line_cond              { False, True }
  Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
  Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and nl_catch_brace.

nl_multi_line_define            { False, True }
  Force a newline in a define after the macro name for multi-line defines.

nl_before_case                  { False, True }
  Whether to put a newline before 'case' statement, not after the first 'case'.

nl_before_throw                 { Ignore, Add, Remove, Force }
  Add or remove newline between ')' and 'throw'.

nl_after_case                   { False, True }
  Whether to put a newline after 'case' statement.

nl_case_colon_brace             { Ignore, Add, Remove, Force }
  Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.

nl_namespace_brace              { Ignore, Add, Remove, Force }
  Newline between namespace and {.

nl_template_class               { Ignore, Add, Remove, Force }
  Add or remove newline between 'template<>' and whatever follows.

nl_class_brace                  { Ignore, Add, Remove, Force }
  Add or remove newline between 'class' and '{'.

nl_class_init_args              { Ignore, Add, Remove, Force }
  Add or remove newline before/after each ',' in the base class list,
    (tied to pos_class_comma).

nl_constr_init_args             { Ignore, Add, Remove, Force }
  Add or remove newline after each ',' in the constructor member initialization.
  Related to nl_constr_colon, pos_constr_colon and pos_constr_comma.

nl_enum_own_lines               { Ignore, Add, Remove, Force }
  Add or remove newline before first element, after comma, and after last element in enum.

nl_func_type_name               { Ignore, Add, Remove, Force }
  Add or remove newline between return type and function name in a function definition.

nl_func_type_name_class         { Ignore, Add, Remove, Force }
  Add or remove newline between return type and function name inside a class {}
  Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.

nl_func_class_scope             { Ignore, Add, Remove, Force }
  Add or remove newline between class specification and '::' in 'void A::f() { }'
  Only appears in separate member implementation (does not appear with in-line implmementation).

nl_func_scope_name              { Ignore, Add, Remove, Force }
  Add or remove newline between function scope and name
  Controls the newline after '::' in 'void A::f() { }'.

nl_func_proto_type_name         { Ignore, Add, Remove, Force }
  Add or remove newline between return type and function name in a prototype.

nl_func_paren                   { Ignore, Add, Remove, Force }
  Add or remove newline between a function name and the opening '(' in the declaration.

nl_func_paren_empty             { Ignore, Add, Remove, Force }
  Overrides nl_func_paren for functions with no parameters.

nl_func_def_paren               { Ignore, Add, Remove, Force }
  Add or remove newline between a function name and the opening '(' in the definition.

nl_func_def_paren_empty         { Ignore, Add, Remove, Force }
  Overrides nl_func_def_paren for functions with no parameters.

nl_func_call_paren              { Ignore, Add, Remove, Force }
  Add or remove newline between a function name and the opening '(' in the call

nl_func_call_paren_empty        { Ignore, Add, Remove, Force }
  Overrides nl_func_call_paren for functions with no parameters.

nl_func_decl_start              { Ignore, Add, Remove, Force }
  Add or remove newline after '(' in a function declaration.

nl_func_def_start               { Ignore, Add, Remove, Force }
  Add or remove newline after '(' in a function definition.

nl_func_decl_start_single       { Ignore, Add, Remove, Force }
  Overrides nl_func_decl_start when there is only one parameter.

nl_func_def_start_single        { Ignore, Add, Remove, Force }
  Overrides nl_func_def_start when there is only one parameter.

nl_func_decl_start_multi_line   { False, True }
  Whether to add newline after '(' in a function declaration if '(' and ')' are in different lines.

nl_func_def_start_multi_line    { False, True }
  Whether to add newline after '(' in a function definition if '(' and ')' are in different lines.

nl_func_decl_args               { Ignore, Add, Remove, Force }
  Add or remove newline after each ',' in a function declaration.

nl_func_def_args                { Ignore, Add, Remove, Force }
  Add or remove newline after each ',' in a function definition.

nl_func_decl_args_multi_line    { False, True }
  Whether to add newline after each ',' in a function declaration if '(' and ')' are in different lines.

nl_func_def_args_multi_line     { False, True }
  Whether to add newline after each ',' in a function definition if '(' and ')' are in different lines.

nl_func_decl_end                { Ignore, Add, Remove, Force }
  Add or remove newline before the ')' in a function declaration.

nl_func_def_end                 { Ignore, Add, Remove, Force }
  Add or remove newline before the ')' in a function definition.

nl_func_decl_end_single         { Ignore, Add, Remove, Force }
  Overrides nl_func_decl_end when there is only one parameter.

nl_func_def_end_single          { Ignore, Add, Remove, Force }
  Overrides nl_func_def_end when there is only one parameter.

nl_func_decl_end_multi_line     { False, True }
  Whether to add newline before ')' in a function declaration if '(' and ')' are in different lines.

nl_func_def_end_multi_line      { False, True }
  Whether to add newline before ')' in a function definition if '(' and ')' are in different lines.

nl_func_decl_empty              { Ignore, Add, Remove, Force }
  Add or remove newline between '()' in a function declaration.

nl_func_def_empty               { Ignore, Add, Remove, Force }
  Add or remove newline between '()' in a function definition.

nl_func_call_empty              { Ignore, Add, Remove, Force }
  Add or remove newline between '()' in a function call.

nl_func_call_start_multi_line   { False, True }
  Whether to add newline after '(' in a function call if '(' and ')' are in different lines.

nl_func_call_args_multi_line    { False, True }
  Whether to add newline after each ',' in a function call if '(' and ')' are in different lines.

nl_func_call_end_multi_line     { False, True }
  Whether to add newline before ')' in a function call if '(' and ')' are in different lines.

nl_oc_msg_args                  { False, True }
  Whether to put each OC message parameter on a separate line
  See nl_oc_msg_leave_one_liner.

nl_fdef_brace                   { Ignore, Add, Remove, Force }
  Add or remove newline between function signature and '{'.

nl_cpp_ldef_brace               { Ignore, Add, Remove, Force }
  Add or remove newline between C++11 lambda signature and '{'.

nl_return_expr                  { Ignore, Add, Remove, Force }
  Add or remove a newline between the return keyword and return expression.

nl_after_semicolon              { False, True }
  Whether to put a newline after semicolons, except in 'for' statements.

nl_paren_dbrace_open            { Ignore, Add, Remove, Force }
  Java: Control the newline between the ')' and '{{' of the double brace initializer.

nl_type_brace_init_lst          { Ignore, Add, Remove, Force }
  Whether to put a newline after the type in an unnamed temporary direct-list-initialization.

nl_type_brace_init_lst_open     { Ignore, Add, Remove, Force }
  Whether to put a newline after open brace in an unnamed temporary direct-list-initialization.

nl_type_brace_init_lst_close    { Ignore, Add, Remove, Force }
  Whether to put a newline before close brace in an unnamed temporary direct-list-initialization.

nl_after_brace_open             { False, True }
  Whether to put a newline after brace open.
  This also adds a newline before the matching brace close.

nl_after_brace_open_cmt         { False, True }
  If nl_after_brace_open and nl_after_brace_open_cmt are True, a newline is
  placed between the open brace and a trailing single-line comment.

nl_after_vbrace_open            { False, True }
  Whether to put a newline after a virtual brace open with a non-empty body.
  These occur in un-braced if/while/do/for statement bodies.

nl_after_vbrace_open_empty      { False, True }
  Whether to put a newline after a virtual brace open with an empty body.
  These occur in un-braced if/while/do/for statement bodies.

nl_after_brace_close            { False, True }
  Whether to put a newline after a brace close.
  Does not apply if followed by a necessary ';'.

nl_after_vbrace_close           { False, True }
  Whether to put a newline after a virtual brace close.
  Would add a newline before return in: 'if (foo) a++; return;'.

nl_brace_struct_var             { Ignore, Add, Remove, Force }
  Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
  Affects enums, unions and structures. If set to ignore, uses nl_after_brace_close.

nl_define_macro                 { False, True }
  Whether to alter newlines in '#define' macros.

nl_squeeze_ifdef                { False, True }
  Whether to remove blanks after '#ifxx' and '#elxx', or before '#elxx' and '#endif'. Does not affect top-level #ifdefs.

nl_squeeze_ifdef_top_level      { False, True }
  Makes the nl_squeeze_ifdef option affect the top-level #ifdefs as well.

nl_before_if                    { Ignore, Add, Remove, Force }
  Add or remove blank line before 'if'.

nl_after_if                     { Ignore, Add, Remove, Force }
  Add or remove blank line after 'if' statement.
  Add/Force work only if the next token is not a closing brace.

nl_before_for                   { Ignore, Add, Remove, Force }
  Add or remove blank line before 'for'.

nl_after_for                    { Ignore, Add, Remove, Force }
  Add or remove blank line after 'for' statement.

nl_before_while                 { Ignore, Add, Remove, Force }
  Add or remove blank line before 'while'.

nl_after_while                  { Ignore, Add, Remove, Force }
  Add or remove blank line after 'while' statement.

nl_before_switch                { Ignore, Add, Remove, Force }
  Add or remove blank line before 'switch'.

nl_after_switch                 { Ignore, Add, Remove, Force }
  Add or remove blank line after 'switch' statement.

nl_before_synchronized          { Ignore, Add, Remove, Force }
  Add or remove blank line before 'synchronized'.

nl_after_synchronized           { Ignore, Add, Remove, Force }
  Add or remove blank line after 'synchronized' statement.

nl_before_do                    { Ignore, Add, Remove, Force }
  Add or remove blank line before 'do'.

nl_after_do                     { Ignore, Add, Remove, Force }
  Add or remove blank line after 'do/while' statement.

nl_ds_struct_enum_cmt           { False, True }
  Whether to double-space commented-entries in struct/union/enum.

nl_ds_struct_enum_close_brace   { False, True }
  force nl before } of a struct/union/enum
  (lower priority than 'eat_blanks_before_close_brace').

nl_before_func_class_def        Unsigned Number
  Add or remove blank line before 'func_class_def'.

nl_before_func_class_proto      Unsigned Number
  Add or remove blank line before 'func_class_proto'.

nl_class_colon                  { Ignore, Add, Remove, Force }
  Add or remove a newline before/after a class colon,
    (tied to pos_class_colon).

nl_constr_colon                 { Ignore, Add, Remove, Force }
  Add or remove a newline around a class constructor colon.
  Related to nl_constr_init_args, pos_constr_colon and pos_constr_comma.

nl_create_if_one_liner          { False, True }
  Change simple unbraced if statements into a one-liner
  'if(b)\n i++;' => 'if(b) i++;'.

nl_create_for_one_liner         { False, True }
  Change simple unbraced for statements into a one-liner
  'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'.

nl_create_while_one_liner       { False, True }
  Change simple unbraced while statements into a one-liner
  'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'.

nl_split_if_one_liner           { False, True }
   Change a one-liner if statement into simple unbraced if
  'if(b) i++;' => 'if(b)\n i++;'.

nl_split_for_one_liner          { False, True }
  Change a one-liner for statement into simple unbraced for
  'for (i=0;<5;i++) foo(i);' => 'for (i=0;<5;i++)\n foo(i);'.

nl_split_while_one_liner        { False, True }
  Change a one-liner while statement into simple unbraced while
  'while (i<5) foo(i++);' => 'while (i<5)\n foo(i++);'.

#
# Blank line options
#

nl_max                          Unsigned Number
  The maximum consecutive newlines (3 = 2 blank lines).

nl_max_blank_in_func            Unsigned Number
  The maximum consecutive newlines in function.

nl_after_func_proto             Unsigned Number
  The number of newlines after a function prototype, if followed by another function prototype.

nl_after_func_proto_group       Unsigned Number
  The number of newlines after a function prototype, if not followed by another function prototype.

nl_after_func_class_proto       Unsigned Number
  The number of newlines after a function class prototype, if followed by another function class prototype.

nl_after_func_class_proto_group Unsigned Number
  The number of newlines after a function class prototype, if not followed by another function class prototype.

nl_before_func_body_def         Unsigned Number
  The number of newlines before a multi-line function def body.

nl_before_func_body_proto       Unsigned Number
  The number of newlines before a multi-line function prototype body.

nl_after_func_body              Unsigned Number
  The number of newlines after '}' of a multi-line function body.

nl_after_func_body_class        Unsigned Number
  The number of newlines after '}' of a multi-line function body in a class declaration.

nl_after_func_body_one_liner    Unsigned Number
  The number of newlines after '}' of a single line function body.

nl_before_block_comment         Unsigned Number
  The minimum number of newlines before a multi-line comment.
  Doesn't apply if after a brace open or another multi-line comment.

nl_before_c_comment             Unsigned Number
  The minimum number of newlines before a single-line C comment.
  Doesn't apply if after a brace open or other single-line C comments.

nl_before_cpp_comment           Unsigned Number
  The minimum number of newlines before a CPP comment.
  Doesn't apply if after a brace open or other CPP comments.

nl_after_multiline_comment      { False, True }
  Whether to force a newline after a multi-line comment.

nl_after_label_colon            { False, True }
  Whether to force a newline after a label's colon.

nl_after_struct                 Unsigned Number
  The number of newlines after '}' or ';' of a struct/enum/union definition.

nl_before_class                 Unsigned Number
  The number of newlines before a class definition.

nl_after_class                  Unsigned Number
  The number of newlines after '}' or ';' of a class definition.

nl_before_access_spec           Unsigned Number
  The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
  Will not change the newline count if after a brace open.
  0 = No change.

nl_after_access_spec            Unsigned Number
  The number of newlines after a 'private:', 'public:', 'protected:', 'signals:' or 'slots:' label.
  0 = No change.
  Overrides 'nl_typedef_blk_start' and 'nl_var_def_blk_start'.

nl_comment_func_def             Unsigned Number
  The number of newlines between a function def and the function comment.
  0 = No change.

nl_after_try_catch_finally      Unsigned Number
  The number of newlines after a try-catch-finally block that isn't followed by a brace close.
  0 = No change.

nl_around_cs_property           Unsigned Number
  The number of newlines before and after a property, indexer or event decl.
  0 = No change.

nl_between_get_set              Unsigned Number
  The number of newlines between the get/set/add/remove handlers in C#.
  0 = No change.

nl_property_brace               { Ignore, Add, Remove, Force }
  Add or remove newline between C# property and the '{'.

eat_blanks_after_open_brace     { False, True }
  Whether to remove blank lines after '{'.

eat_blanks_before_close_brace   { False, True }
  Whether to remove blank lines before '}'.

nl_remove_extra_newlines        Unsigned Number
  How aggressively to remove extra newlines not in preproc.
  0: No change
  1: Remove most newlines not handled by other config
  2: Remove all newlines and reformat completely by config

nl_before_return                { False, True }
  Whether to put a blank line before 'return' statements, unless after an open brace.

nl_after_return                 { False, True }
  Whether to put a blank line after 'return' statements, unless followed by a close brace.

nl_after_annotation             { Ignore, Add, Remove, Force }
  Whether to put a newline after a Java annotation statement.
  Only affects annotations that are after a newline.

nl_between_annotation           { Ignore, Add, Remove, Force }
  Controls the newline between two annotations.

#
# Positioning options
#

pos_arith                       { Ignore, Lead, Trail }
  The position of arithmetic operators in wrapped expressions.

pos_assign                      { Ignore, Lead, Trail }
  The position of assignment in wrapped expressions.
  Do not affect '=' followed by '{'.

pos_bool                        { Ignore, Lead, Trail }
  The position of boolean operators in wrapped expressions.

pos_compare                     { Ignore, Lead, Trail }
  The position of comparison operators in wrapped expressions.

pos_conditional                 { Ignore, Lead, Trail }
  The position of conditional (b ? t : f) operators in wrapped expressions.

pos_comma                       { Ignore, Lead, Trail }
  The position of the comma in wrapped expressions.

pos_enum_comma                  { Ignore, Lead, Trail }
  The position of the comma in enum entries.

pos_class_comma                 { Ignore, Lead, Trail }
  The position of the comma in the base class list if there are more than one line,
    (tied to nl_class_init_args).

pos_constr_comma                { Ignore, Lead, Trail }
  The position of the comma in the constructor initialization list.
  Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon.

pos_class_colon                 { Ignore, Lead, Trail }
  The position of trailing/leading class colon, between class and base class list
    (tied to nl_class_colon).

pos_constr_colon                { Ignore, Lead, Trail }
  The position of colons between constructor and member initialization,
  (tied to nl_constr_colon).
  Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma.

#
# Line Splitting options
#

code_width                      Unsigned Number
  Try to limit code width to N number of columns

ls_for_split_full               { False, True }
  Whether to fully split long 'for' statements at semi-colons.

ls_func_split_full              { False, True }
  Whether to fully split long function protos/calls at commas.

ls_code_width                   { False, True }
  Whether to split lines as close to code_width as possible and ignore some groupings.

#
# Code alignment (not left column spaces/tabs)
#

align_keep_tabs                 { False, True }
  Whether to keep non-indenting tabs.

align_with_tabs                 { False, True }
  Whether to use tabs for aligning.

align_on_tabstop                { False, True }
  Whether to bump out to the next tab when aligning.

align_number_right              { False, True }
  Whether to right-align numbers.

align_keep_extra_space          { False, True }
  Whether to keep whitespace not required for alignment.

align_func_params               { False, True }
  Align variable definitions in prototypes and functions.

align_func_params_span          Unsigned Number
  The span for aligning parameter definitions in function on parameter name (0=don't align).

align_func_params_thresh        Unsigned Number
  The threshold for aligning function parameter definitions (0=no limit).

align_func_params_gap           Unsigned Number
  The gap for aligning function parameter definitions.

align_same_func_call_params     { False, True }
  Align parameters in single-line functions that have the same name.
  The function names must already be aligned with each other.

align_var_def_span              Unsigned Number
  The span for aligning variable definitions (0=don't align)

align_var_def_star_style        Unsigned Number
  How to align the star in variable definitions.
   0=Part of the type     'void *   foo;'
   1=Part of the variable 'void     *foo;'
   2=Dangling             'void    *foo;'

align_var_def_amp_style         Unsigned Number
  How to align the '&' in variable definitions.
   0=Part of the type
   1=Part of the variable
   2=Dangling

align_var_def_thresh            Unsigned Number
  The threshold for aligning variable definitions (0=no limit)

align_var_def_gap               Unsigned Number
  The gap for aligning variable definitions.

align_var_def_colon             { False, True }
  Whether to align the colon in struct bit fields.

align_var_def_colon_gap         Unsigned Number
  align variable defs gap for bit colons.

align_var_def_attribute         { False, True }
  Whether to align any attribute after the variable name.

align_var_def_inline            { False, True }
  Whether to align inline struct/enum/union variable definitions.

align_assign_span               Unsigned Number
  The span for aligning on '=' in assignments (0=don't align)

align_assign_thresh             Unsigned Number
  The threshold for aligning on '=' in assignments (0=no limit)

align_enum_equ_span             Unsigned Number
  The span for aligning on '=' in enums (0=don't align)

align_enum_equ_thresh           Unsigned Number
  The threshold for aligning on '=' in enums (0=no limit)

align_var_class_span            Unsigned Number
  The span for aligning class (0=don't align)

align_var_class_thresh          Unsigned Number
  The threshold for aligning class member definitions (0=no limit).

align_var_class_gap             Unsigned Number
  The gap for aligning class member definitions.

align_var_struct_span           Unsigned Number
  The span for aligning struct/union (0=don't align)

align_var_struct_thresh         Unsigned Number
  The threshold for aligning struct/union member definitions (0=no limit)

align_var_struct_gap            Unsigned Number
  The gap for aligning struct/union member definitions.

align_struct_init_span          Unsigned Number
  The span for aligning struct initializer values (0=don't align)

align_typedef_gap               Unsigned Number
  The minimum space between the type and the synonym of a typedef.

align_typedef_span              Unsigned Number
  The span for aligning single-line typedefs (0=don't align).

align_typedef_func              Unsigned Number
  How to align typedef'd functions with other typedefs
  0: Don't mix them at all
  1: align the open paren with the types
  2: align the function type name with the other type names

align_typedef_star_style        Unsigned Number
  Controls the positioning of the '*' in typedefs. Just try it.
  0: Align on typedef type, ignore '*'
  1: The '*' is part of type name: typedef int  *pint;
  2: The '*' is part of the type, but dangling: typedef int *pint;

align_typedef_amp_style         Unsigned Number
  Controls the positioning of the '&' in typedefs. Just try it.
  0: Align on typedef type, ignore '&'
  1: The '&' is part of type name: typedef int  &pint;
  2: The '&' is part of the type, but dangling: typedef int &pint;

align_right_cmt_span            Unsigned Number
  The span for aligning comments that end lines (0=don't align)

align_right_cmt_mix             { False, True }
  If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment.

align_right_cmt_gap             Unsigned Number
  If a trailing comment is more than this number of columns away from the text it follows,
  it will qualify for being aligned. This has to be > 0 to do anything.

align_right_cmt_at_col          Unsigned Number
  Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)

align_func_proto_span           Unsigned Number
  The span for aligning function prototypes (0=don't align).

align_func_proto_gap            Unsigned Number
  Minimum gap between the return type and the function name.

align_on_operator               { False, True }
  Align function protos on the 'operator' keyword instead of what follows.

align_mix_var_proto             { False, True }
  Whether to mix aligning prototype and variable declarations.
  If True, align_var_def_XXX options are used instead of align_func_proto_XXX options.

align_single_line_func          { False, True }
  Align single-line functions with function prototypes, uses align_func_proto_span.

align_single_line_brace         { False, True }
  Aligning the open brace of single-line functions.
  Requires align_single_line_func=True, uses align_func_proto_span.

align_single_line_brace_gap     Unsigned Number
  Gap for align_single_line_brace.

align_oc_msg_spec_span          Unsigned Number
  The span for aligning ObjC msg spec (0=don't align)

align_nl_cont                   { False, True }
  Whether to align macros wrapped with a backslash and a newline.
  This will not work right if the macro contains a multi-line comment.

align_pp_define_together        { False, True }
  # Align macro functions and variables together.

align_pp_define_gap             Unsigned Number
  The minimum space between label and value of a preprocessor define.

align_pp_define_span            Unsigned Number
  The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks)

align_left_shift                { False, True }
  Align lines that start with '<<' with previous '<<'. Default=True.

align_asm_colon                 { False, True }
  Align text after asm volatile () colons.

align_oc_msg_colon_span         Unsigned Number
  Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)

align_oc_msg_colon_first        { False, True }
  If True, always align with the first parameter, even if it is too short.

align_oc_decl_colon             { False, True }
  Aligning parameters in an Obj-C '+' or '-' declaration on the ':'.

#
# Comment modifications
#

cmt_width                       Unsigned Number
  Try to wrap comments at cmt_width columns

cmt_reflow_mode                 Unsigned Number
  Set the comment reflow mode (Default=0)
  0: no reflowing (apart from the line wrapping due to cmt_width)
  1: no touching at all
  2: full reflow

cmt_convert_tab_to_spaces       { False, True }
  Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting.

cmt_indent_multi                { False, True }
  If False, disable all multi-line comment changes, including cmt_width. keyword substitution and leading chars.
  Default=True.

cmt_c_group                     { False, True }
  Whether to group c-comments that look like they are in a block.

cmt_c_nl_start                  { False, True }
  Whether to put an empty '/*' on the first line of the combined c-comment.

cmt_c_nl_end                    { False, True }
  Whether to put a newline before the closing '*/' of the combined c-comment.

cmt_cpp_group                   { False, True }
  Whether to group cpp-comments that look like they are in a block.

cmt_cpp_nl_start                { False, True }
  Whether to put an empty '/*' on the first line of the combined cpp-comment.

cmt_cpp_nl_end                  { False, True }
  Whether to put a newline before the closing '*/' of the combined cpp-comment.

cmt_cpp_to_c                    { False, True }
  Whether to change cpp-comments into c-comments.

cmt_star_cont                   { False, True }
  Whether to put a star on subsequent comment lines.

cmt_sp_before_star_cont         Unsigned Number
  The number of spaces to insert at the start of subsequent comment lines.

cmt_sp_after_star_cont          Number
  The number of spaces to insert after the star on subsequent comment lines.

cmt_multi_check_last            { False, True }
  For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
  the comment are the same length. Default=True.

cmt_multi_first_len_minimum     Unsigned Number
  For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
  the comment are the same length AND if the length is bigger as the first_len minimum. Default=4

cmt_insert_file_header          String
  The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
  Will substitute $(filename) with the current file's name.

cmt_insert_file_footer          String
  The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
  Will substitute $(filename) with the current file's name.

cmt_insert_func_header          String
  The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
  Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
  Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }.

cmt_insert_class_header         String
  The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
  Will substitute $(class) with the class name.

cmt_insert_oc_msg_header        String
  The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment.
  Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.

cmt_insert_before_preproc       { False, True }
  If a preprocessor is encountered when stepping backwards from a function name, then
  this option decides whether the comment should be inserted.
  Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.

cmt_insert_before_inlines       { False, True }
  If a function is declared inline to a class definition, then
  this option decides whether the comment should be inserted.
  Affects cmt_insert_func_header.

cmt_insert_before_ctor_dtor     { False, True }
  If the function is a constructor/destructor, then
  this option decides whether the comment should be inserted.
  Affects cmt_insert_func_header.

#
# Code modifying options (non-whitespace)
#

mod_full_brace_do               { Ignore, Add, Remove, Force }
  Add or remove braces on single-line 'do' statement.

mod_full_brace_for              { Ignore, Add, Remove, Force }
  Add or remove braces on single-line 'for' statement.

mod_full_brace_function         { Ignore, Add, Remove, Force }
  Add or remove braces on single-line function definitions. (Pawn).

mod_full_brace_if               { Ignore, Add, Remove, Force }
  Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.

mod_full_brace_if_chain         { False, True }
  Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
  If any must be braced, they are all braced.  If all can be unbraced, then the braces are removed.

mod_full_brace_if_chain_only    { False, True }
  Make all if/elseif/else statements with at least one 'else' or 'else if' fully braced.
  If mod_full_brace_if_chain is used together with this option, all if-else chains will get braces,
  and simple 'if' statements will lose them (if possible).

mod_full_brace_nl               Unsigned Number
  Don't remove braces around statements that span N newlines

mod_full_brace_nl_block_rem_mlcond { False, True }
  Blocks removal of braces if the parenthesis of if/for/while/.. span multiple lines.

mod_full_brace_while            { Ignore, Add, Remove, Force }
  Add or remove braces on single-line 'while' statement.

mod_full_brace_using            { Ignore, Add, Remove, Force }
  Add or remove braces on single-line 'using ()' statement.

mod_paren_on_return             { Ignore, Add, Remove, Force }
  Add or remove unnecessary paren on 'return' statement.

mod_pawn_semicolon              { False, True }
  Whether to change optional semicolons to real semicolons.

mod_full_paren_if_bool          { False, True }
  Add parens on 'while' and 'if' statement around bools.

mod_remove_extra_semicolon      { False, True }
  Whether to remove superfluous semicolons.

mod_add_long_function_closebrace_comment Unsigned Number
  If a function body exceeds the specified number of newlines and doesn't have a comment after
  the close brace, a comment will be added.

mod_add_long_namespace_closebrace_comment Unsigned Number
  If a namespace body exceeds the specified number of newlines and doesn't have a comment after
  the close brace, a comment will be added.

mod_add_long_class_closebrace_comment Unsigned Number
  If a class body exceeds the specified number of newlines and doesn't have a comment after
  the close brace, a comment will be added.

mod_add_long_switch_closebrace_comment Unsigned Number
  If a switch body exceeds the specified number of newlines and doesn't have a comment after
  the close brace, a comment will be added.

mod_add_long_ifdef_endif_comment Unsigned Number
  If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
  the #endif, a comment will be added.

mod_add_long_ifdef_else_comment Unsigned Number
  If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
  the #else, a comment will be added.

mod_sort_import                 { False, True }
  If True, will sort consecutive single-line 'import' statements [Java, D].

mod_sort_using                  { False, True }
  If True, will sort consecutive single-line 'using' statements [C#].

mod_sort_include                { False, True }
  If True, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
  This is generally a bad idea, as it may break your code.

mod_move_case_break             { False, True }
  If True, it will move a 'break' that appears after a fully braced 'case' before the close brace.

mod_case_brace                  { Ignore, Add, Remove, Force }
  Will add or remove the braces around a fully braced case statement.
  Will only remove the braces if there are no variable declarations in the block.

mod_remove_empty_return         { False, True }
  If True, it will remove a void 'return;' that appears as the last statement in a function.

mod_sort_oc_properties          { False, True }
  If True, it will organize the properties (Obj-C).

mod_sort_oc_property_class_weight Number
  Determines weight of class property modifier (Obj-C).

mod_sort_oc_property_thread_safe_weight Number
  Determines weight of atomic, nonatomic (Obj-C).

mod_sort_oc_property_readwrite_weight Number
  Determines weight of readwrite (Obj-C).

mod_sort_oc_property_reference_weight Number
  Determines weight of reference type (retain, copy, assign, weak, strong) (Obj-C).

mod_sort_oc_property_getter_weight Number
  Determines weight of getter type (getter=) (Obj-C).

mod_sort_oc_property_setter_weight Number
  Determines weight of setter type (setter=) (Obj-C).

mod_sort_oc_property_nullability_weight Number
  Determines weight of nullability type (nullable, nonnull, null_unspecified, null_resettable) (Obj-C).

#
# Preprocessor options
#

pp_indent                       { Ignore, Add, Remove, Force }
  Control indent of preprocessors inside #if blocks at brace level 0 (file-level).

pp_indent_at_level              { False, True }
  Whether to indent #if/#else/#endif at the brace level (True) or from column 1 (False).

pp_indent_count                 Unsigned Number
  Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level).
  If pp_indent_at_level=False, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level).
  Default=1.

pp_space                        { Ignore, Add, Remove, Force }
  Add or remove space after # based on pp_level of #if blocks.

pp_space_count                  Unsigned Number
  Sets the number of spaces added with pp_space.

pp_indent_region                Number
  The indent for #region and #endregion in C# and '#pragma region' in C/C++.

pp_region_indent_code           { False, True }
  Whether to indent the code between #region and #endregion.

pp_indent_if                    Number
  If pp_indent_at_level=True, sets the indent for #if, #else and #endif when not at file-level.
  0:  indent preprocessors using output_tab_size.
  >0: column at which all preprocessors will be indented.

pp_if_indent_code               { False, True }
  Control whether to indent the code between #if, #else and #endif.

pp_define_at_level              { False, True }
  Whether to indent '#define' at the brace level (True) or from column 1 (false).

pp_ignore_define_body           { False, True }
  Whether to ignore the '#define' body while formatting.

pp_indent_case                  { False, True }
  Whether to indent case statements between #if, #else, and #endif.
  Only applies to the indent of the preprocesser that the case statements directly inside of.

pp_indent_func_def              { False, True }
  Whether to indent whole function definitions between #if, #else, and #endif.
  Only applies to the indent of the preprocesser that the function definition is directly inside of.

pp_indent_extern                { False, True }
  Whether to indent extern C blocks between #if, #else, and #endif.
  Only applies to the indent of the preprocesser that the extern block is directly inside of.

pp_indent_brace                 { False, True }
  Whether to indent braces directly inside #if, #else, and #endif.
  Only applies to the indent of the preprocesser that the braces are directly inside of.

#
# Sort includes options
#

include_category_0              String
  The regex for include category with priority 0.

include_category_1              String
  The regex for include category with priority 1.

include_category_2              String
  The regex for include category with priority 2.

#
# Use or Do not Use options
#

use_indent_func_call_param      { False, True }
  True:  indent_func_call_param will be used (default)
  False: indent_func_call_param will NOT be used.

use_indent_continue_only_once   { False, True }
  The value of the indentation for a continuation line is calculate differently if the line is:
    a declaration :your case with QString fileName ...
    an assignment  :your case with pSettings = new QSettings( ...
  At the second case the option value might be used twice:
    at the assignment
    at the function call (if present)
  To prevent the double use of the option value, use this option with the value 'True'.
  True:  indent_continue will be used only once
  False: indent_continue will be used every time (default).

use_options_overriding_for_qt_macros { False, True }
  SIGNAL/SLOT Qt macros have special formatting options. See options_for_QT.cpp for details.
  Default=True.

#
# Warn levels - 1: error, 2: warning (default), 3: note
#

warn_level_tabs_found_in_verbatim_string_literals Unsigned Number
  Warning is given if doing tab-to-\t replacement and we have found one in a C# verbatim string literal.


# Meaning of the settings:
#   Ignore - do not do any changes
#   Add    - makes sure there is 1 or more space/brace/newline/etc
#   Force  - makes sure there is exactly 1 space/brace/newline/etc,
#            behaves like Add in some contexts
#   Remove - removes space/brace/newline/etc
#
#
# - Token(s) can be treated as specific type(s) with the 'set' option:
#     `set tokenType tokenString [tokenString...]`
#
#     Example:
#       `set BOOL __AND__ __OR__`
#
#     tokenTypes are defined in src/token_enum.h, use them without the
#     'CT_' prefix: 'CT_BOOL' -> 'BOOL'
#
#
# - Token(s) can be treated as type(s) with the 'type' option.
#     `type tokenString [tokenString...]`
#
#     Example:
#       `type int c_uint_8 Rectangle`
#
#     This can also be achieved with `set TYPE int c_uint_8 Rectangle`
#
#
# To embed whitespace in tokenStrings use the '\' escape character, or quote
# the tokenStrings. These quotes are supported: "'`
#
#
# - Support for the auto detection of languages through the file ending can be
#   added using the 'file_ext' command.
#     `file_ext langType langString [langString..]`
#
#     Example:
#       `file_ext CPP .ch .cxx .cpp.in`
#
#     langTypes are defined in uncrusify_types.h in the lang_flag_e enum, use
#     them without the 'LANG_' prefix: 'LANG_CPP' -> 'CPP'
#
#
# - Custom macro-based indentation can be set up using 'macro-open',
#   'macro-else' and 'macro-close'.
#     `(macro-open | macro-else | macro-close) tokenString`
#
#     Example:
#       `macro-open  BEGIN_TEMPLATE_MESSAGE_MAP`
#       `macro-open  BEGIN_MESSAGE_MAP`
#       `macro-close END_MESSAGE_MAP`
#
#