CPDUP(1)

NAME
cpdup - mirror filesystems

SYNOPSIS
cpdup [-C] [-v[v[v]]] [-d] [-n] [-u] [-I] [-f] [-F ssh-arg] [-s0] [-i0] [-j0] [-l] [-q] [-o] [-m] [-H path] [-M file] [-V] [-VV] [-S] [-R] [-k] [-K file] [-X file] [-x] [[user@]host:]source_dir [[user@]host:]target_dir

DESCRIPTION
The cpdup utility makes an exact mirror copy of the source in the destination, creating and deleting files and directories as necessary. UTimes, hardlinks, softlinks, devices, permissions, and flags are mirrored. By default, cpdup asks for confirmation if any file or directory needs to be removed from the destination and does not copy files which it believes to have already been synchronized (by observing that the source and destination files' sizes and mtimes match). cpdup does not cross mount points in either the source or the destination. As a safety measure, cpdup refuses to replace a destination directory with a file.

The following options are available:

-C  If the source or target is a remote host, request that the ssh(1) session be compressed. This is the same as -F -C.

-v[v[v]]
    Set verboseness. By default cpdup does not report its progress except when asking for confirmation. A single -v will only report modifications made to the destination. -vv will report directories as they are being traversed as well as modifications made to the destination. -vvv will cause all files and directories to be reported whether or not modifications are made.

-d  Print directories as they are being traversed. Useful to watch the progress; this typically produces much less output than -vv.

-n  Go through the motions but don't actually make any changes to the target.

-u  Causes the output generated by -v and -d to be unbuffered. This can be useful for obtaining prompt progress updates through a pipe.

-I  will cause cpdup to print a summary at the end with performance counters.

-f  Forces file updates to occur even if the files appear to be the same. If the -H option is used, this option will force a byte for byte comparison between the original file and the file in the hardlink path, even if all the stat info matches, but will still use a hardlink if they match.

-F ssh-arg
    Pass ssh-arg to ssh. For example “-F -p222”. Note the lack of a space.

-s0 Disable the disallow-file-replaces-directory safety feature. This safety feature is enabled by default to prevent user mistakes from blowing away everything accidentally.

-i0 Do not request confirmation when removing something.

-j0 Do not try to recreate CHR or BLK devices.

-l  Line buffer verbose output.

-q  Quiet operation.

-o  Do not remove any files, just overwrite/add.

-m  Generate and maintain a MD5 checkfile called .MD5.CHECKSUMS in each directory on the source and do an MD5 check on each file of the destination when the destination appears to be the same as the source. If the check fails, the source is recopied to the destination. When you specify a destination directory, the MD5 checkfile is only updated as needed and may not be updated even if modifications are made to a source file. If you do not specify a destination directory the cpdup command forcefully regenerates the MD5 checkfile for every file in the source.

-M file
    Works the same as -m but allows you to specify the name of the MD5 checkfile.

-H path
    cpdup will create a hardlink from a file found under path to the target instead of copying the source to the target if the file found via path is identical to the source. Note that a remote host specification should not be used for this option's path, but the path will be relative to the target machine.

    This allows one to use cpdup to create incremental backups of a filesystem. Create a direct ‘level 0’ backup, and then specify the level 0 backup path with this option when creating an incremental backup to a different target directory. This method works so long as the filesystem does not hit a hardlink limit. If the system does hit a hardlink limit, cpdup will generate a warning and copy the file instead. Note that cpdup must record file paths for any hardlinked file while operating and therefore uses a great deal more memory when dealing with hardlinks or hardlink-based backups. Example use:

        cpdup -i0 -s0 -I -H /backup/home.l0 /home /backup/home.l1

    WARNING: If this option is used cpdup must record the paths for all files it encounters while it operates and it is possible that you may run the process out of memory.

    The file found via the hardlink path will be byte-by-byte compared with the source if the -V or -f option is also used, otherwise only the stat info is checked to determine whether it matches the source.

-V  This forces the contents of regular files to be verified, even if the files appear to the be the same. Whereas the -f (force) option forces a copy regardless, this option will avoid rewriting the target if everything matches and the contents are verified to be the same.

-VV This works the same as -V but ignores mtime entirely, making it suitable for comparing HAMMER master and slave filesystems or copies made without mtime retention.

-S  This places cpdup into slave mode and is used to initiate the slave protocol on a remote machine. This option is not intended to be used by humans.

-R  Place the slave into read-only mode. Can only be used when the source is remote. Useful for unattended backups via SSH keys.

-k  Generate and maintain a FSMID checkfile called .FSMID.CHECK in each directory on the target. cpdup will check the FSMID for each source file or directory against the checkfile on the target and will not copy the file or recurse through the directory when a match occurs. Any source file or directory with the same name as the checkfile will be ignored. The FSMID will be re-checked after the copy has been completed and cpdup will loop on that directory or file until it is sure it has an exact copy.

    Warning: FSMID is not always supported by a filesystem and may not be synchronized if a crash occurs. DragonFly will simulate an FSMID when it is otherwise not supported by the filesystem, and users should be aware that simulated FSMIDs may change state in such cases even if the underlying hierarchy does not due to cache flushes. Additionally, the FSMID may not reflect changes made to remote filesystems by other hosts. For example, using these options with NFS mounted sources will not work well.

-K file
    Works the same as -k but allows you to specify the name of the FSMID checkfile.

-x  Causes cpdup to use the exclusion file .cpignore in each directory on the source to determine which files to ignore. When this option is used, the exclusion filename itself is automatically excluded from the copy. If this option is not used then the filename .cpignore is not considered special and will be copied along with everything else.

-X file
    Works similarly to -x but allows you to specify the name of the exclusion file. This file is automatically excluded from the copy. Only one exclusion file may be specified.

    When an absolute path is used, the same exclusive file is read for every directory and may contain full paths or wildcarded paths based on the full source path as specified on the cpdup command line. In this situation, the exclusive file is read from the host running the command, NOT from the source host (if remote).

    When a relative path is used (or -x is specified), the exclusion file is only applicable to the directory it resides in on the source host and only path elements (the directory elements) are matched against it.

REMOTE COPYING
cpdup can mirror directory structures across machines and can also do third-party copies. This also works between machines that use different byte order. ssh(1) sessions are used and cpdup is run on the remote machine(s) in slave mode. You can use the -F option to pass additional flags to the ssh command if necessary.

The syntax of remote path specifications is similar to scp(1). In particular, that means that a local path containing a colon must be preceded by a slash to prevent it being considered a remote host: ‘foo:bar’ causes cpdup to look for a directory called ‘bar’ on host ‘foo’, while ‘./foo:bar’ denotes the directory ‘foo:bar’ on the local machine.

cpdup also supports a ‘localhost:’ prefix which is silently discarded but prevents any colons in the remainder of the path from being interpreted as a host:path form. this form can be used with relative filenames when you do not want colons in the filename to be misinterpreted.

EXIT STATUS

SEE ALSO
cp(1), cpio(1), scp(1), ssh(1), tar(1)

HISTORY
The cpdup command was originally created to update servers at BEST Internet circa 1997 and was placed under the FreeBSD copyright for inclusion in the ports area in 1999. The program was written by Matthew Dillon, Dima Ruban, and later significantly improved by Oliver Fromme.

BUGS
UFS(5) has a hardlink limit of 32767. Many programs, in particular CVS with regards to its CVS/Root file, will generate a lot of hard links. When using the -H option it may not be possible for cpdup to maintain these hard links. If this occurs, cpdup will be forced to copy the file instead of link it, and thus not be able to make a perfect copy of the filesystem.

When so-called sparse files (i.e. files with "holes") are copied, the holes will be filled in the target files, so they occupy more physical disk space than the source files.

For compatibility reasons, the slave protocol is not as efficient for writing remote files as it is for reading them. Therefore it is recommended to run cpdup on the target machine when making remote copies, so the source machine is remote. If you do it the other way, cpdup will run somewhat slower.